+86-573-84665511info@jxtisen.com

Categories

ADD: Room 101 Ground Floor, No.55 Fengli Road, Dayun Town, Jiashan, Zhejiang, China

PHONE: +86-573-18157320188

TEL: +86-573-84665511

FAX: +86-573-84665689

E-mail: info@jxtisen.com

susan.xu@jxtisen.com

lucy.luo@jxtisen.com

Website: www.jxtisen.com

Home > Exhibition > Content

Composite Bearing Technical Parameters, Physical Properties and Friction Coefficient

Technical Parameters:

Steel-Based PTFE composite bearings of the technical parameters

Maximum load pressure 140 N/mm2
Applicable temperature range -195℃ - +300℃
Maximum sliding speed  5 m/s 
Coefficient of friction μ 0.04-0.18
Allow the minimum PV value 4,3,N/mm2·m/s
Allow the highest PV value 50,N/mm2·m/s


Physical properties:

The surface layer of the bearing material is very thin, usually 0.02-0.06 mm, therefore, the 

compressive strength of the bearing material\linear expansion coefficient and thermal 

conductivity and other physical and mechanical properties of indicators is far superior to pure 

plastic.

ParameterMaterial
ProjectSteel based PTFE Composite Bearings
Thermal conductivity (Cal/s, cn, ℃)0.1
Linear expansion coefficient (1/℃)3,0*10-5
Compressive strength (MPa)>300


Friction coefficient:

The friction coefficient is one of the main parameters of the physical properties of the feiction 

material. It is closely related to the surface properties of the material, the material of the 

pairing pair, the condition of the lubricating medium and the experimental conditions. The 

following is the friction coefficientof PZF-1 bearing material under different lubrication 

conditions.

lubricating conditionsSteel based PTFE composite bearings
Oil lubrication 

0.01-0.04

Grease lubrication\
Water lubrication

\

Dry friction 0.07-0.20